How to Use DESIRE
Introduction
DESIRE is designed to support cue shaft maintenance work in a simple and controlled way.
The system allows smooth shaft rotation while maintaining the manual control required for delicate cue maintenance operations.
It is particularly useful for sanding, cleaning, and finishing cue shafts.
Basic Setup
Before starting, make sure that the working surface is stable and clean.
Place the DESIRE system on a flat surface and ensure that the rollers rotate freely.
Check that all components are properly aligned before mounting the cue shaft.
Mounting the Cue Shaft
- Place the cue shaft gently on the support rollers.
- Adjust the position so the shaft sits evenly on the rollers.
- Confirm that the shaft rotates smoothly by hand.
The shaft should rotate without vibration or excessive friction.
Shaft Rotation
Once the shaft is mounted correctly, rotation can begin.
The smooth rotation of the shaft allows consistent sanding and finishing work.
Maintain light pressure during sanding operations to avoid uneven surfaces.
Sanding and Maintenance Work
DESIRE is commonly used for the following cue maintenance operations:
• Shaft cleaning
• Surface sanding
• Minor finishing work
Always perform maintenance work slowly and carefully.
The goal is to maintain the original shape and balance of the cue shaft.
Tips for Better Results
For the best results:
• Use light sanding pressure
• Rotate the shaft evenly
• Check the shaft surface frequently
Careful and gradual work will produce the most consistent results.
Safety Notice
DESIRE is a professional tool designed for cue makers and cue maintenance specialists.
This product requires appropriate knowledge and experience in cue maintenance work.
All operations performed using DESIRE are the responsibility of the user.
Users must ensure proper setup, alignment, and safe operation at all times.
WakaiSS Works is not responsible for damage to cue shafts, materials, or equipment resulting from improper use or incorrect handling.
Always use the product responsibly and follow appropriate safety practices.
Regular maintenance of the tool is recommended to ensure stable performance and reduce potential risks.
DESIRE is intended for professional use only. Always follow proper safety practices. Use of this product is at your own risk.
